Download the ZIP file and unzip/extract it onto your hard drive. Rename the program from “PC2AGM.EXX” to “PC2AGM.EXE” then double-click the file to run it. For Windows Vista, 7, 8 and 10, a DOS emulator such as DOSBox will need to be used. Please use these instructions to properly configure DOSBox.

NOTE: Use only for EID 1234yf SAE products with serial numbers > 60,000

NOTE: Use only for EID 1234yf SAE products with serial numbers < 60,000

A tool for communicating with a device in the Fyrite family.

Firmware Upgrade for the Fyrite InTech (v1.40)

Latest firmware upgrade for H25-IR.

Latest firmware upgrade for the H25-IR PRO (v1.18).

For use with HGM300 & HGM MZ units with v1.21 firmware or above, which were built August 2001 or later (as indicated by a serial number that starts with AH01 or above). The firmware version is also indicated on the label on the ROM module inside the HGM300 or HGM MZ. Download the ZIP file and unzip/extract it onto your hard drive. Rename the program from “PC2HGM.EXX” to “PC2HGM.EXE” then double-click the file to run it. For Windows Vista, 7, 8 and 10, a DOS emulator such as DOSBox will need to be used. Please use these instructions to properly configure DOSBox.

This configuration file must be installed on the host computer where the Lonworks communications software is installed in order to achieve proper communication between the adapter board and the monitor. This .XIF file is a text file and should be opened with NotePad or an equivalent.

For use with HGM300 units with v1.0 firmware which were built June 2001 or before (as indicated by a serial number that starts with AF01 or lower). For Windows Vista, 7, 8 and 10, a DOS emulator such as DOSBox will need to be used. Please use these instructions to properly configure DOSBox.

Firmware Upgrade for the Fyrite® Insight® Plus (v1.40)

Firmware Upgrade for the Neutronics Legend Series

Latest data manager template for MGS-400 Gas Detector Series

Latest firmware upgrade for MGS-408.

For use with halogen / CO₂ /NH₃ / Ethylene Multi-Zone Refrigerant Monitors.

MGate Manager Software for the MVR-SC Controller

Download the ZIP file and unzip/extract it onto your hard drive, then double click the file Rfu.exe to run it.

Field Diagnostics support
If you have any difficulties, rest assured help is on hand. Contact our support team who will be more than happy to help:
Phone:+1 610.524.8800
Business Hours: 8:30am-5pm (EST) Monday to Friday

Latest firmware update for the PCA 400 combustion and emissions analyzer. To perform a firmware update, connect your analyzer to your PC via the USB port and power on the instrument, open the PCA Reporting Software, click “Update Instrument” on the right side of the window, and then select this .pkg file.

PC reporting software for the PCA 400.

Firmware upgrade for use with Halogen PGM-IRs (those without internal purge air bag) (v2.12).

Firmware upgrade for use with Halogen/N2O/CO2/SF6 PGM-IRs (those that contain internal purge air bag) (v2.22).

For use with Remote Displays connected to standard halogen / CO₂ / NH₃ / Ethylene Multi-Zone Refrigerant Monitors.

Firmware update for Single-Zone v2.12