Skip to main content
MGS-402 Gas Detection Controller

MGS-402 Gas Detection Controller

2-Channel controller for refrigerant, toxic and combustible gas detection

Bacharach’s MGS-402 Gas Detection Controller centralizes the status of up to two gas detectors, provides a complete package for your safety compliance application. On the front panel of the MGS-402 a bank of LEDs corresponds to each connected gas detector; showing power, alarm status and fault indicators. The MGS-402 can provide the power requirements for to up to two gas detectors, which can be daisy-chained with Modbus communication to each gas detector; simplifying and reducing the cost of installation.

 

The MGS-402 can be integrated with Bacharach’s MGS-410 gas detector; allowing for a flexible gas detection system design which can utilize the benefits of multiple gas detector types as required in different locations (machinery rooms, cold storage rooms, walk-in freezers and food preparation areas).

  • Designed for operation in refrigeration applications with an IP66-rated enclosure to protect from dust and water ingress (suitable for use in cold rooms and freezers down to -40°C)
  • MGS-410 Gas Detectors may be installed in hard-to-reach / elevated locations (distances up to 305m from the controller)
  • Centralized power and communications for up-to two connected MGS-410 gas detectors
  • Tri-color LED indicators provide “at-a-glance” system / alarm status
  • Two configurable Analog outputs (4-20mA, 0-5V, 0-10V, 1-5V or 2-10V) and Modbus communications (slave) for integration with Bacharach’s MGS-408 controller or third-party BMS / BAS control systems
  • Three user-configurable relays (fault, low and high alarm) may be used to activate external beacons / sounders, ventilation or other countermeasures
  • Integrated audible / visual alarms with push button silence for refrigeration safety compliance – no additional hardware
Show Less
Read More
MGS-402 Gas Detection Controller
MGS-402 Gas Detection Controller
2-Channel controller for refrigerant, toxic and combustible gas detection
Videos
Specifications
Approvals
Tools and Training
Literature
Videos
Show More Videos
Show Less Videos
Specifications
Alarm
Integrated Audible / Visual Alarm
Altitude
0 to 6,560 ft (2,000 m)
Ambient Temperature
-40 to 122°F (-40 to +50°C)
Analog Communication
4 to 20 mA, 1 to 5 V, 2 to 10 V
Approvals / Standards
CE, UL / CSA / IEC EN 61010-1
Buzzer Volume
80 dB @ 10 cm
Country of Origin
United States
Digital Communications
Modbus RTU via RS 485
Enclosure Rating
IP66
Humidity
5 to 90% RH, non-condensing
Operating Voltage
100 to 240 VAC, 50/60 Hz
Power
100 - 240 VAC, 50/60 Hz, 20 W (max.)
Product Dimensions (L×W×H)
6.5” × 6.5” × 3.4” (165 × 165 × 87 mm)
Product Weight
1 lb, 11.07 oz (758 g)
Relay Rating
2 Alarm relays, 1 Fault relay SPDT
Sensors
2
User Interface
Configuration through DIP switches
Warranty
1 Year
Wiring
10 A @ 240VAC
Approvals
Approvals subject to change without notice and may differ based on configuration, part number and/or country. Contact Customer Service or check approval label on product for specific approval information.
Tools and Training
Literature
Part Number(s)

Ask a Question