Skip to main content
7100 Trace Oxygen Analyzer

7100 Trace Oxygen Analyzer

Trace oxygen analyzer

The Neutronics 7100 Trace Oxygen Analyzer is a compact analyzer designed for trace oxygen gas measurement. This analyzer features a rapid-response mini-zirconia sensor with a measurement range of 0 to 1000 ppm oxygen. Extremely fast response, high accuracy, and no requirement for periodic calibrations make this analyzer a low-maintenance solution that delivers reliable performance for critical process control applications.

 

The compact series analyzers are easy to install. With a small footprint, the analyzers are designed to be flush mounted onto the surface of a control panel and integrated into a wide variety of equipment components.

  • 0 to 1000 ppm measurement range
  • Mini-zirconia oxide ZR-400 sensor
  • ± 2.0% accuracy
  • Internal or remote sensor mounting with KF fitting option
  • T90 < 10 seconds
Show Less
Read More
7100 Trace Oxygen Analyzer
7100 Trace Oxygen Analyzer
Trace oxygen analyzer
Videos
Specifications
Approvals
Tools and Training
Literature
Videos
Show More Videos
Show Less Videos
Specifications
Accuracy
±2.0% of range at CTP or ±3 ppm
Ambient Temperature
32 to 122°F (0 to 50°C)
Analog Communication
Serial RS-232 service portAnalog 0-1, 0-5,0-10 VDCand 4-20 mA
Display Size
7 seg. 0.75" LED4 alphanumeric characters;LEDs for system status: run,/fault/alarm 1/alarm 2
Enclosure Rating
Ctrl panel: WeathrproofNEMA 4 (IP66)Rear electronic chassis:Nema 1, IP20
Expected Sensor Service Life
3 to 4 Years
Humidity
0 to 95% RH (non-condensing)
Measuring Range
0-100 ppm, 0 - 1000 ppm auto
Power
90 - 264 VAC or 24 VDC
Product Dimensions (L×W×H)
Analyzer: 7" × 4.125" × 3.75" (17.78 × 10.48 × 9.53 cm) Sensor: 1.5" diam. × 3.25" long
Product Weight
3 lbs
Relay Rating
2 alarm relays, field adjustable 1 system fault relay, non-adj
Response Time
T90 < 10 sec
Sensor Type
Mini-Zirconia ZR400
Warranty
Analyzer: 1 Year Sensor: 6 months
Approvals
Approvals subject to change without notice and may differ based on configuration, part number and/or country. Contact Customer Service or check approval label on product for specific approval information.
Tools and Training
Literature
Part Number(s)

Ask a Question