MGS-150

Gas Detector Series
  • Infrared, electrochemical and MOS sensor options
  • Detects CFC, HCFC, HFC, refrigerants, oxygen, toxic and combustible gases
  • Selectable current or volt analog output
  • IP66 housing options, including remote and duct mount sensors
  • Built-in relay with adjustable set-point
Ammonia (NH3), Carbon Dioxide (CO2), Hydrocarbons, HFCs, HCFCs, CFCs, Methane (CH4), Propane (C3H8), Butane (C4H10), LPG, Hydrogen (H2), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Chloride (HCl), Hydrogen Cyanide (HCN), Hydrogen Sulfide (H2S), Nitric Oxide (NO), Nitrogen Dioxide (NO2), Ozone (O3), Sulfur Dioxide (SO2), and Oxygen (O2), NH3, CO2, HFC, GCFC, CFC, CH4, C3H8, C4H10, H2, CO, Cl2, HCl, HCN, H2S, NO, NO2, O3, SO2, O2

The MGS-150 Gas Detector can meet almost any gas detection need with multiple sensor options for real-time monitoring of refrigerants, oxygen, combustible and toxic gases. It includes user-selectable current or volt analog outputs, allowing connectivity to most BMS, SCADA or central control systems. Status LEDs and a buzzer are integrated for local alarming while an onboard relay with user-adjustable set-point can connect to external visual/audible alarms.

A variety of enclosure options, including an economical IP41 housing and a dust/water tight IP66 housing, allow the MGS-150 transmitters to be placed in the toughest environments. Special remote sensor configurations are available for applications where mounting in vent pipes, duct work or other tight spaces is required.

Type

Gas detector using IR, electrochemical or semiconductor sensors

Gases

Refrigerants:

Ammonia, Carbon Dioxide, Hydrocarbons, and HFCs, HCFCs, CFCs

Combustible gases:

Methane, Propane, Butane, LPG, and Hydrogen

Toxic gases:

Ammonia, Carbon Dioxide, Carbon Monoxide, Chlorine, Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Sulfide, Nitric Oxide, Nitrogen Dioxide, Ozone, Sulfur Dioxide, and Oxygen

Measuring Range *

ppm, %LEL or Vol%

Status Indicators

Green and red LEDs

Analog Output

4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V

Power Supply

24 VDC or 24 VAC; 4-wire

Audible Alarm

85 dB buzzer

Relay

1 alarm relay, SPDT

Rating 1 A @ 24 VDC / 24 VAC, resistive load

Alarm delay 0, 1, 5, or 10 minutes; user-selectable

Ambient Conditions*

Temperature

IP41 - 4 to +122 °F (- 20 to +50 °C)

IP66 - 40 to +122 °F (- 40 to +50 °C)

Humidity

0 to 95 %RH, non condensing

Altitude

0 to 10,000 ft (3,050 m)

Enclosure

Ex d; Copper Free Aluminum

Size (w x h x d)

Approx. *

IP41 3.4” x 5.6” x 2.1” (90 x 145 x 55 mm)

IP66 6.5” x 6.9” x 3.3” (165 x 175 x 85 mm)

Ex d 5.2” x 6.3” x 3.6” (135 x 160 x 95 mm)

Weight Approx. *

IP41 6.3 oz (180 g)

IP66 22 oz (175 x 165 x 85 mm)

Ex d 9.3 lbs (4.2 kg)

Approvals

CE, UL, CSA, IEC, EN 61010-1

* See datasheet for details

Common Configurations (see configuration matrix for all possible configurations)

Part Number

Description

6300-2030

MGS-150, NH3, 0-100 ppm, IP66 housing, low temp

6300-2032

MGS-150, NH3, 0-1,000 ppm, IP66 housing, low temp

6300-1018

MGS-150, CO Parking Garage , IP41 housing

6300-1101

MGS-150, R-134a 0-1,000 ppm, IP41 housing

6300-8031

MGS-150, NH3, 0-500 ppm, duct mount, IP66 housing

6300-1001

MGS-150, CO 0-1,000 ppm, IP41 housing

6300-4103

MGS-150, R-404a 0-1,000 ppm, IP66 housing w/ remote sensor

6300-2105

MGS-150, R-407a 0-1,000 ppm, IP66 housing

Part Number

Description

 

6700-0330

MGS-Controller, 2 channel, 2 alarm, 110 VAC

Related_MGS_ControllerRGB--2

6700-0331

MGS-Controller, 2 channel, 2 alarm, 220 VAC

Related_MGS_ControllerRGB--2

6700-0350

MGS-Controller, 4 channel, 2 alarm, 110 VAC

Related_MGS_ControllerRGB--2

6700-0351

MGS-Controller, 4 channel, 2 alarm, 220 VAC

Related_MGS_ControllerRGB--2

6700-0370

MGS-Controller, 6 channel, 2 alarm, 110 VAC

Related_MGS_ControllerRGB--2

6700-0371

MGS-Controller, 6 channel, 2 alarm, 220 VAC

Related_MGS_ControllerRGB--2

6700-0372

MGS-Controller, 6 channel, 2 alarm, 12 VDC

Related_MGS_ControllerRGB--2

6109-0000

Splash guard for IP66 MGD/MGS