The MANUALS tab below contains manuals for older and obsolete products. To access the manuals of current products, please refer to the Technical Library tab on each individual product page. Access current products from here.
The DOWNLOADS tab below contains downloads of current and previous revisions of communications software for current and obsolete products.
|AGM300||v1.52 (95K)||Unzip the downloaded file onto your hard drive or floppy. Start the program by double clicking the filename PC2AGM.EXE.|
|HGM300||v1.0 (150K)||Use with HGM300 units with v1.0 Unit Firmware, which were built June 2001 or before (as indicated by a serial number that starts with AF01 or lower).|
|HGM MZ |
|v1.53 (64K)||Use with HGM300 & HGM MZ units with v1.21 Unit Firmware or above, which were built August 2001 or later (as indicated by a serial number that starts with AH01 or above). The Firmware version is also indicated on the label on the ROM module inside the HGM300 or HGM MZ.
Unzip the downloaded file onto your hard drive or floppy. Start the program by double clicking the filename PC2HGM.EXX.
|HGM300 & HGM MZ||v4.00 (8K)||This configuration file must be installed on the host computer where the Lonworks communications software is installed in order to achieve proper communication between the adapter board and the monitor. This .XIF file is a text file and should be opened with NotePad or an equivalent.|