|
[ Back to Home ]
DOWNLOADS
AGM300 Software
The following software allows an AGM300 Ammonia Gas Monitoring System to be connected to a DOS or Windows (capable of running DOS programs) based PC via the PC's RS-232 port. With this software, you can monitor and control the operation of your Refrigerant Monitoring System from a personal computer.
| Unit | Software Version | Notes: |
|---|
| AGM300 |
v1.52 (95K)
 |
Unzip the downloaded file onto your hard drive or floppy. Start the program by double clicking the filename PC2AGM.EXE. |
BACH-COM Data Download Software
| Unit | Software Version | Notes: |
|---|
Used with instruments:
- CO2 Monitor 2810, 2815 & 2820
- StowSeek
- N2O Monitor 3010
- MGC 100
|
v2.34 (5.6 MB)
|
*Note: Unzip downloaded file into a separate directory on your hard drive, and then run "setup.exe" to install. |
BACH-COM Plus Data Download Software
| Unit | Software Version | Notes: |
|---|
Used with instruments:
- CO2 Analyzer 2825, 2830 & 2835
- Comfort Check 100 & 200
- MGC 200
|
v1.01 (4.6 MB)
|
*Note: Unzip downloaded file into a separate directory on your hard drive, and then run "setup.exe" to install. |
H25-IR Flash Memory Utility
This utility is used to flash the memory of the H25-IR with the appropriate firmware image file.
| Unit | Software Version | Notes: |
|---|
| H25-IR |
v2.45 (1560 KB)
|
Unzip downloaded files into a separate directory on your hard drive. Instructions on how to use this utility is included in the zip file. |
H25-IR Firmware Image File
Latest firmware image file for the H25-IR.
| Unit | Firmware Version | Notes: |
|---|
| H25-IR |
v1.65 (125 KB)
|
Copy the firmware's image BIN file into the same directory that contains the H25-IR Flash Memory Utility. Instructions on how to flash memory is contained in the H25-IR Flash Memory Utility zip file. |
HGM300 & HGM MZ Software
The following software allows an HGM300 Refrigerant Monitoring System to be connected to a DOS or Windows (capable of running DOS programs) based PC via the PC's RS-232 port. With this software, you can monitor and control the operation of your Refrigerant Monitoring System from a personal computer.
| Unit | Software Version | Notes: |
|---|
| HGM300 |
v1.0 (150K)
|
Use with HGM300 units with v1.0 Unit Firmware, which were built June 2001 or before (as indicated by a serial number that starts with AF01 or lower). |
HGM MZ
& HGM300 |
v1.53 (64K)
|
Use with HGM300 & HGM MZ units with v1.21 Unit Firmware or above, which were built August 2001 or later (as indicated by a serial number that starts with AH01 or above). The Firmware version is also indicated on the label on the ROM module inside the HGM300 or HGM MZ.
Unzip the downloaded file onto your hard drive or floppy. Start the program by double clicking the filename PC2HGM.EXX. |
HGM200 & HGM200A Software
| Unit | Software Version | Notes: |
|---|
| HGM200 |
v3.04 (218K)
|
Unzip downloaded file onto a bootable, MS-DOS Startup disk. |
| HGM200A |
v5.04-R (211K)
|
Unzip downloaded file onto a bootable, MS-DOS Startup disk. |
v7.0 (219K)
|
Use on HGM200A units with the HGM300 style I/R bench.
Unzip downloaded file onto a bootable, MS-DOS Startup disk. |
|
HGM300 & HGM MZ PC Software Manual (152K)
